moxa-iologik-e1200-series-image-1-(2)

Moxa iologik E1214

OBSERON LPR TCP/IP I/O Moduli  6 In/6 Out

Saatavuus: Ei varastossa, vain jälkitoimituksena Tuotetunnus (SKU): 105684
Hinnat vain jälleenmyyjille. Kirjaudu sisään nähdäksesi hinnat

Kuvaus

ioLogik E1214 Specifications
Inputs and Outputs
Digital Inputs 6 channels
Relay Outputs 6 channels
Isolation 3k VDC or 2k Vrms
Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter
Dry Contact • On: short to GND
• Off: open
Wet Contact (DI to COM) • On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type 6 points per COM
Counter Frequency 250 Hz
Digital Filtering Time Interval Software Configurable
Relay Output
Type Form A (N.O.) power relay
Contact Current Rating Resistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Breakdown Voltage 500 VAC
Relay On/Off Time 1500 ms (max.)
Initial Insulation Resistance 1000 M ohms (min.) @ 500 VDC
Mechanical Endurance 5,000,000 operations
Electrical Endurance 100,000 operations @ 5 A resistive load
Contact Resistance 100 m ohms (max.)
Pulse Output 0.3 Hz at rated load
Note Ambient humidity must be non-condensing and remain between 5 and 95%. The relays of the ioLogik E1214 may malfunction when operating in high condensation environments below 0° Celsius.
Power Requirements
Power Consumption 188 mA @ 24 VDC
MTBF (mean time between failures)
Time 808,744 hrs
Database Telcordia (Bellcore)
Common Specifications
LAN
Ethernet 2 switched 10/100 Mbps RJ45 ports
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, HTTP
Power Requirements
Power Input 24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Wiring I/O cable max. 14 AWG
Dimensions 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight Under 200 g
Mounting DIN rail or wall
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Safety UL 508
EMI EN 55022; EN 61000-3-2; EN 61000-3-3;
FCC Part 15, Subpart B, Class A
EMS EN 55024, EN 61000-4-2, EN 61000-4-3,
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
EN 61000-4-8, EN 61000-4-11
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Green Product RoHS, CRoHS, WEEE
Hazardous Location UL/cUL Class I Diision 2, ATEX Zone 2
Warranty
Warranty Period 5 years (excluding ioLogik E1214)
Details See www.moxa.com/warranty
Note Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.